Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 237)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 233
Analysis Teledyne LeCroy
 Idle (Initiator): Host idle time
 Idle (Target): Device idle time (total)
 SSP Bus Utilization: SSP bus utilization time (SSP frames)
 SMP Bus Utilization: SSP bus utilization time (SMP frames)
 STP Bus Utilization: SSP bus utilization time (STP frames)
 Report
 Count or Time
Figure 3.34: Others Report
SSP Transport Report (SAS)
To display the SSP Transport Report, click the SSP Transport tab. The SSP Transport Report
displays the report data in columns with the following (see
Figure 3.35 on
page 233 )information :
 Type: All, Custom, Command, Data, Response, XFER_RDY
 Direction: All, I‐>T, T‐>I, or Custom
 Duration: All, Custom, or time unit
 Count: All, Custom, or a number
 %: of total count
Figure 3.35: SAS: SSP Transport Report
SMP Transport Report (SAS)
To display the SMP Transport Report, click the SMP Transport tab. The SMP Transport
Report displays the report data in columns with the following information:
 Type: All, Custom, Request, Response
 Direction: All, I‐>T, T‐>I, or Custom
 Duration: All, Custom, or time unit
 Count: All, Custom, or a number
 %: of total count