Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 479)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 475
Display Options Teledyne LeCroy
 Stop Recording: Stop Analyzer without switching to Analyzer frame.
 Abort Recording: Abort Analyzer without switching to Analyzer frame.
The Generator Toolbar has the following:
 Start Generation
 Stop Generation
 Resume Generation
 Connect Link
 Disconnect Link
 Generation Options
From time to time (such as following a software upgrade), it is possible for the buttons on
the toolbar to not match their intended function. You can reset the toolbar by performing
the following steps:
1. Select View > Toolbars from the menu bar.
2. Select Customize from the submenu to display the Customize dialog box.
Figure 5.36: Customize Commands