Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 74)

Teledyne LeCroy SAS/SATA Software Menus and Toolbars
72 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
STP Frame
Double‐click STP Frame to open the STP Frame Type dialog.
Figure 2.22: STP Frame Type Dialog
Click the down arrow next to the Type drop‐down list box, choose an FIS type to capture
or exclude, and click OK. Repeat for additional types.
Available FIS Types:
 Register Host to Device
 Register Device to Host
 Set Device Bits
 DMA Activate
 DMA Setup
 BIST
 PIO Setup
 Data
 Vendor
2.2.24 Address Frame (SAS only)
Double‐click Address Frame to open the Address Frame Type Pattern dialog (see
Figure 2.23 on page 73 ).