Fortinet 548B - Manual (Page 97)

- 97 -
7.2.7.2 ip igmp snooping querier address
The user can go to the CLI Global Configuration Mode to set IGMP snooping querier address, use the ip
igmp snooping querier address global configuration command. Use the no ip igmp
snooping querier address return to default value zero.
Syntax
ip igmp snooping querier address
no ip igmp snooping querier address
- ip address
Default Setting
0.0.0.0
Command Mode
Global Config
7.2.7.3 ip igmp snooping querier query-interval
The user can go to the CLI Global Configuration Mode to set IGMP snooping querier query interval, use
the ip igmp snooping querier query-interval <1-1800> global configuration command. Use the no ip
igmp snooping querier query-interval return to default value zero.
Syntax
ip igmp snooping querier query-interval <1-1800>
no ip igmp snooping querier query-interval
<1-1800> - set IGMP snooping querier query interval
Default Setting
Disabled
Command Mode
Global Config
7.2.7.4 ip igmp snooping querier querier-expiry-interval
The user can go to the CLI Global Configuration Mode to set IGMP snooping querier querier expiry
interval, use the ip igmp snooping querier querier-expiry-interval <60-300> global configuration
command. Use the no ip igmp snooping querier query-interval return to default value zero.