Fortinet 548B - Manual (Page 262)

- 262 -
Default Setting
None
Command Mode
Global Config
7.8.4.7 radius-server retransmit
This command sets the maximum number of times a request packet is re-transmitted when no response
is received from the RADIUS server. The retries value is an integer in the range of 1 to 15.
Syntax
radius-server retransmit
no radius-server retransmit
- the maximum number of times (Range: 1 - 15).
no - This command sets the maximum number of times a request packet is re-transmitted, when no
response is received from the RADIUS server, to the default value, that is, 10.
Default Setting
10
Command Mode
Global Config
7.8.4.8 radius-server timeout
This command sets the timeout value (in seconds) after which a request must be retransmitted to the
RADIUS server if no response is received. The timeout value is an integer in the range of 1 to 30.
Syntax
radius-server timeout
no radius-server timeout
- the maximum timeout (Range: 1 - 30).
no - This command sets the timeout value (in seconds) after which a request must be retransmitted
to the RADIUS server if no response is received, to the default value, that is, 6.
Default Setting
6