Fortinet 548B - Manual (Page 210)

- 210 -
7.4.2.2 spanning-tree protocol-migration
This command enables BPDU migration check on a given interface. The all option enables BPDU
migration check on all interfaces.
Syntax
spanning-tree protocol-migration { | all}
no spanning-tree protocol-migration { | all}
- is the desired interface number.
all - All interfaces.
no - This command disables BPDU migration check on a given interface. The all option disables
BPDU migration check on all interfaces.
Default Setting
None
Command Mode
Global Config
7.4.2.3 spanning-tree configuration
This command sets the Configuration Identifier Name for use in identifying the configuration that this
switch is currently using. The is a string of at most 32 alphanumeric characters.
Syntax
spanning-tree configuration name
no spanning-tree configuration name
- is a string of at most 32 alphanumeric characters.
no - This command resets the Configuration Identifier Name to its default.
Default Setting
The base MAC address displayed using hexadecimal notation as specified in IEEE 802 standard.
Command Mode
Global Config
This command sets the Configuration Identifier Revision Level for use in identifying the configuration that
this switch is currently using. The Configuration Identifier Revision Level is a number in the range of 0 to
65535.