Fortinet 548B - Manual (Page 547)

- 547 -
ICMPv6 Rate Limit Burst Size：Shows the number of ICMPv6 error messages that can be sent
during one burst-interval.
For more information, see “ipv6 icmp error-interval”
Maximum Routes：Shows the maximum IPv6 route table size.
10.3.1.2 show ipv6 interface port
This command displays the usability status of IPv6 interfaces.
Syntax
show ipv6 interface [{ brief | port [prefix]}]
- Valid slot and port number separated by forward slashes.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
If you use the brief parameter, the following information displays for all configured IPv6 interfaces:
Interface: Shows the interface in slot/port format.
IPv6 Routing Operational Mode: Shows whether the mode is enabled or disabled.
IPv6 Address/Length: Shows the IPv6 address and length on interfaces with IPv6 enabled.
If you specify an interface, the following information also appears.
Routing Mode: Shows whether IPv6 routing is enabled or disabled.
Administrative Mode: Shows whether the interface administrative mode is enabled or disabled.
IPv6 Implicit Mode: Shows IPv6 implicit mode is enabled or disabled.
IPv6 Routing Operational Mode: Shows whether the operational state of an interface is enabled or
disabled.
Bandwidth: Shows the bandwidth of the interface.
Interface Maximum Transmission Unit: Shows the MTU size, in bytes.
Router Duplicate Address Detection Transmits: Shows the number of consecutive duplicate
address detection probes to transmit.
Router Advertisement NS Interval: Shows the interval, in milliseconds, between router
advertisements for advertised neighbor solicitations.
Router Lifetime Interval: Shows the router lifetime value of the interface in router advertisements