Fortinet 548B - Manual (Page 702)

- 702 -

IP Address -IP address

Filter Type - This tells you the IPSG filtering Type.

Page - Lists the Number of Pages the IPSG dynamic binding entries occupied. Select the
Page Number from this list to display the particular Page entries.
Command Buttons
Add - Adds DHCP snooping binding entry into the database.
Submit - Deletes selected static entries from the database.
Refresh - Refresh the data on the screen with the present state of the data in the switch.
11.3.3 Managing Dynamic ARP Inspection (DAI)
11.3.3.1 Configuring DAI Global Configuration Page
Configurable Data
Validate Source MAC - Choose the DAI Source MAC Validation Mode for the switch by selecting
Enable or Disable from the pull down menu. If you select Enable, Sender MAC validation for the ARP
packets will be enabled. The factory default is disable.
Validate Destination MAC - Choose the DAI Destination MAC Validation Mode for the switch by
selecting Enable or Disable from the pull down menu. If you select Enable, Destination MAC
validation for the ARP Response packets will be enabled. The factory default is disable.
Validate IP - Choose the DAI IP Validation Mode for the switch by selecting Enable or Disable from
the pull down menu. If you select Enable, IP Address validation for the ARP packets will be enabled.
The factory default is disable.
Command Buttons
Submit - Update the switch with the values you entered. If you want the switch to retain the new
values across a power cycle you must perform a save.