Fortinet 548B - Manual (Page 37)

- 37 -
Display Message
System Description: Text used to identify this switch.
System Object ID: The manufacturing ID
System Information
System Up Time: The time in days, hours and minutes since the last switch reboot.
System Name: Name used to identify the switch.
System Location: Text used to identify the location of the switch. May be up to 31 alpha-numeric
characters. The factory default is blank.
System Contact: Text used to identify a contact person for this switch. May be up to 31
alphanumeric characters. The factory default is blank.
MAC Address: The burned in MAC address used for in-band connectivity.
Web Server: Displays to enable/disable web server function
Web Server Port: Displays the web server http port
Web Server Java Mode: Specifies if the switch should allow access to the Java applet in the header
frame. Enabled means the applet can be viewed. The factory default is disabled.
Protocol Current: Indicates which network protocol is being used. The options are bootp | dhcp |
none.
DHCP Client Identifier TEXT: DCHP client identifier for this switch.
7.1.8 show tech-support
This command displays system and configuration information when you contact technical support. The
output of the show tech-support command combines the output of the following commands: show
version, show sysinfo, show port all, show logging, show event log,
• show logging buffered,
show trap log, show running config.
Syntax
show tech-support
Default Setting
None
Command Mode
Privileged Exec
7.1.9 show hardware
This command displays inventory information for the switch.
Syntax
show hardware