Fortinet 548B - Manual (Page 654)

- 654 -
11.2.7.2 Configuring sFlow Receiver Configuration Page
Selection Criteria
Receiver Index - Selects the receiver for which data is to be displayed or configured. Allowed range
is (1 to 8 )
Configurable Data
Receiver Owner - The entity making use of this sFlowRcvrTable entry. The empty string indicates
that the entry is currently unclaimed and the receiver configuration is reset to default values. An
entity wishing to claim an sFlowRcvrTable entry must ensure that the entry is unclaimed before
trying to claim it. The entry is claimed by setting the owner string. The entry must be claimed before
any changes can be made to other sampler objects.
sFlow Receiver Timeout - The time (in seconds) remaining before the sampler is released and
stops sampling. A management entity wanting to maintain control of the sampler is responsible for
setting a new value before the old one expires. Allowed range is (0 to 4294967295 secs) A value of
zero sets the selected receiver configuration to its default values.
sFlow Receiver Maximum Datagram Size - The maximum number of data bytes that can be sent
in a single sample datagram. The manager should set this value to avoid fragmentation of the sFlow
datagrams. Default Value: 1400. Allowed range is (200 to 9116 )
sFlow Receiver Address - The IP address of the sFlow collector. If set to 0.0.0.0 no sFlow
datagrams will be sent.
sFlow Receiver Port - The destination port for sFlow datagrams. Allowed range is (1 to 65535 )
Non-Configurable Data
Receiver Index - The index of this receiver.
Receiver Owner - The entity making use of this sFlowRcvrTable entry. The empty string indicates
that the entry is currently unclaimed.
sFlow Receiver Timeout - The time (in seconds) remaining before the sampler is released and
stops sampling.
sFlow Receiver Maximum Datagram Size - The maximum number of data bytes that can be sent
in a single sample datagram.