Fortinet 548B - Manual (Page 196)

- 196 -
Default Setting
1400
Command Mode
Global Config
7.3.13.8 set sflow receiver address
The user can go to the CLI Global Configuration Mode to set receiver ip address, use the sflow receiver
ip global configuration command. Use the no sflow receiver ip to clear collector
ip address.
Syntax
sflow receiver ip
no sflow receiver ip
Default Setting
None
Command Mode
Global Config
7.3.13.9 set sflow receiver port
The user can go to the CLI Global Configuration Mode to set collector UDP port, use the sflow receiver
port <1-65535> global configuration command. Use the no sflow collector-port return to
default UDP port 6343.
Syntax
sflow receiver port <1-65535>
no sflow receiver port
Default Setting
6343
Command Mode
Global Config