Fortinet 548B - Manual (Page 184)

- 184 -
Syntax
ip http server
no ip http server
no - This command disables access to the switch through the Web interface. When access is
disabled, the user cannot login to the switch's Web server.
Default Setting
Enabled
Command Mode
Global Config
7.3.7.5 ip http secure-port
This command is used to set the SSLT port where port can be 1-65535 and the default is port 443.
Syntax
ip http secure-port
no ip http secure-port
- SSLT Port value.
no - This command is used to reset the SSLT port to the default value.
Default Setting
443
Command Mode
Global Config
7.3.7.6 ip http secure-server
This command is used to enable the secure socket layer for secure HTTP.
Syntax
ip http secure-server
no ip http secure-server
no - This command is used to disable the secure socket layer for secure HTTP.