Fortinet 548B - Manual (Page 477)

- 477 -
8.5.2.9 distribute-list
This command is used to specify the access list to filter routes received from the source protocol. Source
protocols have OSPF, Static, and Connected.
Syntax
distribute-list <1-199> out {ospf | static | connected}
no distribute-list <1-199> out {ospf | static | connected}
<1 - 199> - Access List ID value. The Access List filters the routes to be redistributed by the source
protocol.
no - This command is used to cancel the access list to filter routes received from the source protocol.
Default Setting
0
Command Mode
Router RIP Config
8.5.2.10 redistribute
This command configures RIP protocol to redistribute routes from the specified source protocol/routers.
There are five possible match options. When you submit the command redistribute ospf match
the match-type or types specified are added to any match types presently being
redistributed. Internal routes are redistributed by default. Source protocols have OSPF, Static, and
Connetced. Match types will have internal, external 1, external 2, nssa-external 1, and nssa-external 2.
Syntax
Format for OSPF as source protocol:
redistribute ospf [metric <1-15>] [match [internal] [external 1] [external 2] [nssa-external 1]
[nssa-external 2]]
Format for other source protocols:
redistribute {static | connected} [metric <1-15>]
no redistribute {ospf | static | connected} [metric] [match [internal] [external 1] [external 2]
[nssa-external 1] [nssa-external 2]]
<1 - 15> - a value for metric.
no - This command de-configures RIP protocol to redistribute routes from the specified source
protocol/routers.
Default Setting
Metric - not-configured
Match - internal