Fortinet 548B - Manual (Page 459)

- 459 -
Command Mode
Privileged Exec
8.3.2.30 clear ip ospf redistribution
Use this command to flush all self-originated external LSAs. Reapply the redistribution configuration and
re-originate prefixes as necessary.
Syntax
clear ip ospf redistribution
Default Setting
None
Command Mode
Privileged Exec
8.3.2.31 default-information originate
default-information originate command is used to control the advertisement of default routes.
no default-information originate command is used to control the advertisement of default routes.
Syntax
default-information originate [always] [metric <0-16777214>] [metric-type {1 | 2}]
no default-information originate [metric] [metric-type]
Default Setting
metric —unspecified
type —2
Command Mode
Router OSPF Config Mode
8.3.2.32 default-metric
default-metric command is used to set a default for the metric of distributed routes.
no default-metric command is used to set a default for the metric of distributed routes.
Syntax
default-metric <1-16777214>
no default-metric