Fortinet 548B - Manual (Page 444)

- 444 -
Router Priority: The OSPF priority for the specified interface. The priority of an interface is a priority
integer from 0 to 255. A value of '0' indicates that the router is not eligible to become the designated
router on this network.
Dead Timer Due: The amount of time, in seconds, to wait before the router assumes the neighbor is
unreachable.
Up Time: Neighbor uptime; how long since the adjacency last reached the Full state.
State: The state of the neighboring routers.
Events: The number of times this neighbor relationship has changed state, or an error has occurred.
Retransmission Queue Length: An integer representing the current length of the retransmission
queue of the specified neighbor router Id of the specified interface.
8.3.1.11 show ip ospf range
This command displays information about the area ranges for the specified . The
identifies the OSPF area whose ranges are being displayed..
Syntax
show ip ospf range
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
Area ID: The area id of the requested OSPF area.
IP Address: An IP address which represents this area range.
Subnet Mask: A valid subnet mask for this area range.
Lsdb Type: The type of link advertisement associated with this area range.
Advertisement: The status of the advertisement. Advertisement has two possible settings: enabled
or disabled.
8.3.1.12 show ip ospf statistics
This command displays information about recent Shortest Path First (SPF) calculations. The SPF is the
OSPF routing table calculation. The output lists the number of times the SPF has run for each OSPF
area. A table follows this information. For each of the 15 most recent SPF runs, the table lists how long
ago the SPF ran, how long the SPF took, and the reasons why the SPF was scheduled.