Fortinet 548B - Manual (Page 503)

- 503 -
9.2.2 Configuration Commands
9.2.2.1 ip igmp
This command sets the administrative mode of IGMP in the router to active.
Syntax
ip igmp
no ip igmp
no - This command sets the administrative mode of IGMP in the router to inactive.
Default Setting
Disabled
Command Mode
Global Config
This command sets the administrative mode of IGMP on an interface to active.
Syntax
ip igmp
no ip igmp
no - This command sets the administrative mode of IGMP on an interface to inactive.
Default Setting
Disabled
Command Mode
Interface Config
9.2.2.2 ip igmp version
This command configures the version of IGMP for an interface.
Syntax
ip igmp version {1 | 2 | 3}
no ip igmp version
<1- 3> - The igmp version number.