Fortinet 548B - Manual (Page 155)

- 155 -
Command Mode
Global Config
7.3.1.5 ip address
This command sets the IP Address, and subnet mask. The IP Address and the gateway must be on the
same subnet.
Syntax
ip address
no ip address
- IP address
- Subnet Mask
no - Restore the default IP address and Subnet Mask
Default Setting
IP address: 0.0.0.0
Subnet Mask: 0.0.0.0
Command Mode
Interface-Vlan Config
Command Usage
Once the IP address is set, the VLAN ID ’s value will be assigned to management VLAN.
7.3.1.6 ip default-gateway
This command sets the IP Address of the default gateway.
Syntax
ip default-gateway
no ip default-gateway
< gateway > - IP address of the default gateway
no - Restore the default IP address of the default gateway
Default Setting
IP address: 0.0.0.0