Fortinet 548B - Manual (Page 364)

- 364 -
is the name of an existing DiffServ class.
is a case-sensitive alphanumeric string from 1 to 31 characters uniquely
identifying the class.
!
The class name ‘default’ is reserved and must not be used here.
Default Setting
None
Command Mode
Global Config
7.21.2.4 match any
This command adds to the specified class definition a match condition whereby all packets are
considered to belong to the class.
Syntax
match any
Default Setting
None
Command Mode
Class-Map Config / Ipv6-Class-Map Config
7.21.2.5 match class-map
This command adds to the specified class definition the set of match conditions defined for another
class.
Syntax
match class-map
<refclassname> is the name of an existing DiffServ class whose match conditions are being
referenced by the specified class definition.
i
There is no [not] option for this match command.