1 assign-queue, 2 drop, 3 mirror – Fortinet 548B User Manual
Page 375
- 375 -
7.21.3.1 assign-queue
This command modifies the queue id to which the associated traffic stream is assigned. The queueid is
an integer from 0 to n-1, where n is the number of egress queues supported by the device.
Syntax
assign-queue <0-7>
<0-7> - Queue ID.
Command Mode
Policy-Class-Map Config
Incompatibilities
Drop
7.21.3.2 drop
This command specifies that all packets for the associated traffic stream are to be dropped at ingress.
Syntax
drop
Command Mode
Policy-Class-Map Config
Incompatibilities
Assign Queue, Mark (all forms), Mirror, Police, Redirect
7.21.3.3 mirror
This command specifies that all incoming packets for the associated traffic stream are copied to a
specific egress interface (physical port or LAG).
i
This command is not available on the Broadcom 5630x platform.
Syntax
mirror