Fortinet 548B - Manual (Page 783)

- 783 -
11.3.27 Managing FIP-Snooping
11.3.27.1 Configuring FIP-Snooping Configuration
Selection Criteria
Admin Mode - Enable/Disable FIP Snooping function.

Enable - Enable FIP Snooping and start the FIP Snooping process.

Disable - Disable ETS and stop the ETS process.
The system's default FIP Snooping admin mode is disabled.
Vlan ID - Configure Vlans the FIP packets will be snooped.
Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is performed.
11.3.27.2 Viewing FIP-Snooping Status
Non-Configurable Data
FIP Snooping Session

FCF MAC - MAC address of the FCF.

ENode MAC - MAC address of the ENode.

FCoE MAC - FCoE MAC address that is used to send the FCoE packets.