Fortinet 548B - Manual (Page 152)

- 152 -
<-1-1> - This command sets value of CNM's inner VLAN tag's CFI bits.
<-1-7> - This command sets value of CNM's inner VLAN tag's 802.1p bits.
no - This command restored default value..
Default Setting
Command Mode
Global Config
7.2.18.10 congestion-notify no-generate
The user can go to the CLI Global Configuration Mode to choose the CNM generation behavior when
congestion notification threshold is reached but the incoming sampled packet does not have CN-TAG.
Use the ‘congestion-notify no-generate’ global configuration command. Use the ‘no congestion-notify
no-
generate’ to keep generate CNM.
Syntax
congestion-notify no-generate
no congestion-notify no-generate
no - This command uses to keep generate CNM.
Default Setting
keep generate CNM.
Command Mode
Global Config
7.3 Management Commands
7.3.1 Network Commands
7.3.1.1 show ip interface
This command displays configuration settings associated with the switch's network interface. The
network interface is the logical interface used for in-band connectivity with the switch via any of the