Fortinet 548B - Manual (Page 665)

- 665 -
Selection Criteria
Slot/Port - Selects the interface for which data is to be displayed or configured.
Non-Configurable Data
ifIndex - This object indicates the ifIndex of the interface table entry associated with this port on an
adapter.
Packets RX and TX 64 Octets - The total number of packets (including bad packets) received or
transmitted that were 64 octets in length (excluding framing bits but including FCS octets).
Packets RX and TX 65-127 Octets - The total number of packets (including bad packets) received
or transmitted that were between 65 and 127 octets in length inclusive (excluding framing bits but
including FCS octets).
Packets RX and TX 128-255 Octets - The total number of packets (including bad packets) received
or transmitted that were between 128 and 255 octets in length inclusive (excluding framing bits but
including FCS octets).
Packets RX and TX 256-511 Octets - The total number of packets (including bad packets) received
or transmitted that were between 256 and 511 octets in length inclusive (excluding framing bits but
including FCS octets).
Packets RX and TX 512-1023 Octets - The total number of packets (including bad packets)
received or transmitted that were between 512 and 1023 octets in length inclusive (excluding framing
bits but including FCS octets).
Packets RX and TX 1024-1518 Octets - The total number of packets (including bad packets)
received or transmitted that were between 1024 and 1518 octets in length inclusive (excluding
framing bits but including FCS octets).
Packets RX and TX 1519-2047 Octets - The total number of packets (including bad packets)
received or transmitted that were between 1519 and 2047 octets in length inclusive (excluding
framing bits but including FCS octets).
Packets RX and TX 2048-4095 Octets - The total number of packets (including bad packets)
received or transmitted that were between 2048 and 4095 octets in length inclusive (excluding
framing bits but including FCS octets).
Packets RX and TX 4096-9216 Octets - The total number of packets (including bad packets)
received or transmitted that were between 4096 and 9216 octets in length inclusive (excluding
framing bits but including FCS octets).
Octets Received - The total number of octets of data (including those in bad packets) received on
the network (excluding framing bits but including FCS octets). This object can be used as a
reasonable estimate of ethernet utilization. If greater precision is desired, the etherStatsPkts and
etherStatsOctets objects should be sampled before and after a common interval.
Packets Received 64 Octets - The total number of packets (including bad packets) received that
were 64 octets in length (excluding framing bits but including FCS octets).
Packets Received 65-127 Octets - The total number of packets (including bad packets) received
that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS
octets).
Packets Received 128-255 Octets - The total number of packets (including bad packets) received
that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS
octets).
Packets Received 256-511 Octets - The total number of packets (including bad packets) received
that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS
octets).