Fortinet 548B - Manual (Page 707)

- 707 -
DHCP Permits - Number of ARP packets that were forwarded by DAI as there is a matching DHCP
Snooping binding entry found.
ACL Permits - Number of ARP packets that were permitted by DAI as there is a matching ARP ACL
rule found for this VLAN.
Bad Source MAC - Number of ARP packets that were dropped by DAI as the sender MAC address
in ARP packet didn't match the source MAC in ethernet header.
Bad Dest MAC - Number of ARP packets that were dropped by DAI as the target MAC address in
ARP reply packet didn't match the destination MAC in ethernet header.
Invalid IP - Number of ARP packets that were dropped by DAI as the sender IP address in ARP
packet or target IP address in ARP reply packet is invalid. Invalid addresses include 0.0.0.0,
255.255.255.255, IP multicast addresses, class E addresses (240.0.0.0/4), loopback addresses
(127.0.0.0/8).
Forwarded - Number of valid ARP packets forwarded by DAI.
Dropped - Number of invalid ARP packets dropped by DAI.
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the switch.
11.3.4 Managing Filters
11.3.4.1 Configuring MAC filter Configuration Page
Selection Criteria
MAC Filter - This is the list of MAC address and VLAN ID pairings for all configured filters. To
change the port mask(s) for an existing filter, select the entry you want to change. To add a new
filter, select "Create Filter" from the top of the list.
VLAN ID - The VLAN ID used with the MAC address to fully identify packets you want filtered. You
can only change this field when you have selected the "Create Filter" option.
Configurable Data
MAC Address - The MAC address of the filter in the format 00:01:1A:B2:53:4D. You can only
change this field when you have selected the "Create Filter" option.
You cannot define filters for these MAC addresses:

00:00:00:00:00:00