Fortinet 548B - Manual (Page 171)

- 171 -
OSPFv3 Traps May be enabled or disabled. The factory default is disabled. Indicates whether
OSPF traps will be sent.
PIM Traps May be enabled or disabled. The factory default is disabled. Indicates whether PIM traps
will be sent.
7.3.5.3 snmp-server sysname
This command sets the name of the switch. The range for name is from 1 to 31 alphanumeric
characters.
Syntax
snmp-server sysname
- Range is from 1 to 31 alphanumeric characters.
Default Setting
None
Command Mode
Global Config
7.3.5.4 snmp-server location
This command sets the physical location of the switch. The range for name is from 1 to 31 alphanumeric
characters.
Syntax
snmp-server location
- range is from 1 to 31 alphanumeric characters.
Default Setting
None
Command Mode
Global Config