Fortinet 548B - Manual (Page 835)

- 835 -
Router Version Errors - The total number of VRRP packets received with an unknown or
unsupported version number.
Router VRID Errors - The total number of VRRP packets received with an invalid VRID for this
virtual router.
VRID - the VRID for the selected Virtual Router.
Slot/Port - The Slot/Port for the selected Virtual Router.
Up Time - The time, in days, hours, minutes and seconds, that has elapsed since the virtual router
transitioned to the initialized state.
State Transitioned to Master - The total number of times that this virtual router's state has
transitioned to Master.
Advertisement Received - The total number of VRRP advertisements received by this virtual
router.
Advertisement Interval Errors - The total number of VRRP advertisement packets received for
which the advertisement interval was different than the one configured for the local virtual router .
Authentication Failure - The total number of VRRP packets received that did not pass the
authentication check.
IP TTL Errors - The total number of VRRP packets received by the virtual router with IP TTL
(Time-To-Live) not equal to 255.
Zero Priority Packets Received - The total number of VRRP packets received by the virtual router
with a priority of '0'.
Zero Priority Packets Sent - The total number of VRRP packets sent by the virtual router with a
priority of '0'.
Invalid Type Packets Received - The number of VRRP packets received by the virtual router with
an invalid value in the 'type' field.
Address List Errors - The total number of packets received for which the address list does not
match the locally configured list for the virtual router.
Invalid Authentication Type - The total number of packets received with an unknown
authentication type.
Authentication Type Mismatch - The total number of packets received with an authentication type
different to the locally configured authentication method.
Packet Length Errors - The total number of packets received with a packet length less than the
length of the VRRP header.
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the switch.
11.4.10 Managing Tunnels
11.4.10.1 Configuring Tunnels Configuration Page
Tunnels can be created, configured and deleted from this page.