Fortinet 548B - Manual (Page 685)

- 685 -
Last Attempt Status - Specifies the status of the last SNTP request or unsolicited message for both
unicast and broadcast modes. If no message has been received from a server, a status of Other is
displayed. These values are appropriate for all operational modes.

Other - None of the following enumeration values.

Success - The SNTP operation was successful and the system time was updated.

Request Timed Out - A directed SNTP request timed out without receiving a response from
the SNTP server.

Bad Date Encoded - The time provided by the SNTP server is not valid.

Version Not Supported - TheSNTP version supported by the server is not compatible with
the version supported by the client.

Server Unsychronized - The SNTP server is not synchronized with its peers. This is
indicated via the 'leap indicator' field on the SNTP message.

Server Kiss Of Death - The SNTP server indicated that no further queries were to be sent to
this server. This is indicated by a stratum field equal to 0 in a message received from a
server.
Server IP Address - Specifies the IP address of the server for the last received valid packet. If no
message has been received from any server, an empty string is shown.
Address Type - Specifies the address type of the SNTP Server address for the last received valid
packet.
Server Stratum - Specifies the claimed stratum of the server for the last received valid packet.
Reference Clock Id - Specifies the reference clock identifier of the server for the last received valid
packet.
Server Mode - Specifies the mode of the server for the last received valid packet.
Unicast Sever Max Entries - Specifies the maximum number of unicast server entries that can be
configured on this client.
Unicast Server Current Entries - Specifies the number of current valid unicast server entries
configured for this client.
Broadcast Count - Specifies the number of unsolicited broadcast SNTP messages that have been
received and processed by the SNTP client since last reboot.
Multicast Count - Specifies the number of unsolicited muticast SNTP messages that have been
received and processed by the SNTP client since last reboot.