Fortinet 548B - Manual (Page 87)

- 87 -
Default Setting
1000 centiseconds (10 seconds)
Command Mode
Global Config
7.2.6 IGMP Snooping
7.2.6.1 ip igmp snooping
The user can go to the CLI Global Configuration Mode to set IGMP Snooping on the system, use the ip
igmp snooping global configuration command. Use the no ip igmp snooping to disable IGMP
Snooping on the system.
Syntax
ip igmp snooping
no ip igmp snooping
Default Setting
Disabled
Command Mode
Global Config
7.2.6.2 ip igmp snooping interfacemode
The user can go to the CLI Global/Interface Configuration Mode to set IGMP Snooping on one interface
or all interfaces, use the ip igmp snooping interfacemode global/interface configuration command.
Use the no ip igmp snooping interfacemode disable IGMP Snooping on all interfaces.
Syntax
ip igmp snooping interfacemode all
no ip igmp snooping interfacemode all
ip igmp snooping interfacemode
no ip igmp snooping interfacemode
Default Setting
None