Fortinet 548B - Manual (Page 898)

- 898 -
Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is performed.
Rename - Rename the currently selected IPv6 ACL.
Delete - Removes the currently selected IPv6 ACL from the switch configuration.
11.7.1.5 IPv6 Access Control List Summary Page
Non-Configurable Data
IPv6 ACL Name - Exiting IPv6 ACL identifier.
Rules - The number of rules currently configured for the IPv6 ACL.
Direction - The direction of packet traffic affected by the IPv6 ACL.
Direction can only be one of the following:
Inbound
Slot/Port(s) - The interfaces to which the IPv6 ACL applies.
VLAN(s) - VLAN(s) to which the IPv6 ACL applies.
Command Buttons
Refresh - Refresh the data on the screen to the latest state.
11.7.1.6 IPv6 Access Control List Rule Configuration Page
Use these screens to configure the rules for the IPv6 Access Control Lists, which is created using the
IPv6 Access Control List Configuration screen. By default, no specific value is in effect for any of the
IPv6 ACL rules.