Fortinet 548B - Manual (Page 452)

- 452 -
Command Mode
Router OSPF Config Mode
8.3.2.13 area range
area range command creates a specified area range for a specified NSSA. The is a valid IP
address. The is a valid subnet mask. The LSDB type must be specified by either
summarylink or nssaexternallink, and the advertising of the area range can be allowed or suppressed.
no area range command deletes a specified area range. The is a valid IP address. The
is a valid subnet mask.
Syntax
area range {summarylink | nssaexternallink} [advertise |
not-advertise]
no area range
Default Setting
None
Command Mode
Router OSPF Config Mode
8.3.2.14 area stub
area stub command creates a stub area for the specified area ID. A stub area is characterized by the
fact that AS External LSAs are not propagated into the area. Removing AS External LSAs and Summary
LSAs can significantly reduce the link state database of routers within the stub area. no area stub
command deletes a stub area for the specified area ID.
Syntax
area stub
no area stub
Default Setting
None
Command Mode
Router OSPF Config Mode