4 clear logging buffered, 5 clear config – Fortinet 548B User Manual
Page 322
- 322 -
Default Setting
None
Command Mode
Privileged Exec
7.17.1.4 clear logging buffered
This command is used to clear the message log maintained by the switch. The message log contains
system trace information.
Syntax
clear logging buffered
Default Setting
None
Command Mode
Privileged Exec
7.17.1.5 clear config
This command resets the configuration to the factory defaults without powering off the switch. The switch
is automatically reset when this command is processed. You are prompted to confirm that the reset
should proceed.
Syntax
clear config
Default Setting
None
Command Mode
Privileged Exec