Fortinet 548B - Manual (Page 287)

- 287 -
Chassis ID: The ID that is sent by a remote device as part of the LLDP message, it is usually a MAC
address of the device.
Port ID: Shows the port number that transmitted the LLDPDU.
System Name: Shows the system name of the remote device.
7.12.1.5 show lldp remote-device detail
This command uses to display detailed information about remote devices that transmit current LLDP
data to an interface on the system.
Syntax
show lldp remote-device detail
- Displays a specific interface.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Local Interface: Identifies the interface that received the LLDPDU from the remote device.
Remote Identifier: An internal identifier to the switch to mark each remote device to the system.
Chassis ID Subtype: Shows the type of identification used in the Chassis ID field.
Chassis ID: Identifies the chassis of the remote device.
Port ID Subtype: Identifies the type of port on the remote device.
Port ID: Shows the port number that transmitted the LLDPDU.
System Name: Shows the system name of the remote device.
System Description: Describes the remote system by identifying the system name and versions of
hardware, operating system, and networking software supported in the device.
Port Description: Describes the port in an alpha-numeric format. The port description is
configurable.
System Capabilities Supported: Indicates the primary function(s) of the device.
System Capabilities Enabled: Shows which of the supported system capabilities are enabled.
Management Address: For each interface on the remote device with an LLDP agent, lists the type
of address the remote LLDP agent uses and specifies the address used to obtain information related
to the device.
Time To Live: Shows the amount of time (in seconds) the remote device's information received in
the LLDPDU should be treated as valid information.