Fortinet 548B - Manual (Page 761)

- 761 -
11.3.21.2 Configuring Port Security Interface Page
Selection Criteria
Slot/Port - Selects the interface to be configured.
Port Security - Enables or disables the Port Security feature for the selected interface.
Enable violation traps- Enables or disables the sending of new violation traps designating when a
packet with a disallowed MAC address is received on a locked port.
Enable violation Shutdown- Enables or disables the Port Security Violation Shutdown mode for the
selected interface.
Configurable Data
Maximum Number of Dynamically Learned MAC Addresses Allowed - Sets the maximum
number of dynamically learned MAC addresses on the selected interface.
Add a static MAC address- Adds a MAC address to the list of statically locked MAC addresses for
the selected interface.
VLAN ID- Adds a corresponding VLAN ID for the MAC Address being added to the list of statically
locked MAC addresses for the selected interface.
Maximum Number of Statically Locked MAC Addresses Allowed - Sets the maximum number of
statically locked MAC addresses on the selected interface.
Command Buttons
Clear - Clears the Dynamic MAC addresses of the selected interface.
Move - Convert a dynamically locked MAC address to a statically locked address. The Dynamic
MAC address entries are converted to Static MAC address entries in a numerically ascending order
till the Static limit is reached.
Submit - Applies the new configuration and causes the changes to take effect. These changes will
not be retained across a power cycle unless a save configuration is performed.