16 match source-address mac, 17 match srcip – Fortinet 548B User Manual
Page 371
- 371 -
7.21.2.16 match source-address mac
This command adds to the specified class definition a match condition based on the source MAC
address of a packet. The
hexadecimal numbers separated by colons (e.g., 00:11:22:dd:ee:ff). The
layer 2 MAC address bit mask, which may not be contiguous, and is formatted as six, two-digit
hexadecimal numbers separated by colons (e.g., ff:07:23:ff:fe:dc).
i
This command is not available on the Broadcom 5630x platform.
Syntax
match source-address mac
- Specifies any layer 2 MAC address.
Default Setting
None
Command Mode
Class-Map Config
7.21.2.17 match srcip
This command adds to the specified class definition a match condition based on the source IP address
of a packet.
Syntax
match srcip > <ipmask> - specifies an IP address bit mask; note that although it resembles a standard subnet Default Setting None Command Mode Class-Map Config
mask, this bit mask need not be contiguous.