2 configuration commands, 1 bootpdhcprelay cidoptmode, 2 bootpdhcprelay enable – Fortinet 548B User Manual
Page 469: 3 bootpdhcprelay maxhopcount
- 469 -
8.4.2
Configuration Commands
8.4.2.1 bootpdhcprelay cidoptmode
This command enables the circuit ID option mode for BootP/DHCP Relay on the system.
Syntax
bootpdhcprelay cidoptmode
no bootpdhcprelay cidoptmode
Default Setting
Disabled
Command Mode
Global Config
8.4.2.2 bootpdhcprelay enable
This command enables the forwarding of relay requests for BootP/DHCP Relay on the system.
Syntax
bootpdhcprelay enable
no bootpdhcprelay enable
no - Disable the forwarding of relay requests for BootP/DHCP Relay on the system.
Default Setting
Disabled
Command Mode
Global Config
8.4.2.3 bootpdhcprelay maxhopcount
This command configures the maximum allowable relay agent hops for BootP/DHCP Relay on the
system.
Syntax
bootpdhcprelay maxhopcount <1-16>
no bootpdhcprelay maxhopcount