Fortinet 548B - Manual (Page 91)

- 91 -
7.2.6.9 set igmp fast-leave
The user can go to the CLI VLAN Configuration Mode to set IGMP Snooping fast-leave admin mode on
a particular VLAN, use the set igmp fast-leave vlan configuration command. Use the no set
igmp fast-leave disable IGMP Snooping fast-leave admin mode.
Syntax
set igmp fast-leave
no set igmp fast-leave
- VLAN ID (Range: 1 – 3965).
Default Setting
Disabled
Command Mode
VLAN Mode
7.2.6.10 set igmp groupmembership-interval
The user can go to the CLI VLAN Configuration Mode to set the IGMP Group Membership Interval time
on a particular VLAN, use the set igmpgroupmembership-interval <2-3600> vlan
configuration command. Use the no set igmp groupmembership-interval return to default
value 260.
Syntax
set igmp groupmembership-interval <2-3600>
no set igmp groupmembership-interval
- VLAN ID (Range: 1 – 3965).
<2-3600> - The range of group membership interval time is 2 to 3600 seconds.
Default Setting
260
Command Mode
VLAN Mode
7.2.6.11 set igmp maxresponse
The user can go to the CLI Interface VLAN Mode to set the IGMP Maximum Response time on a
particular VLAN, use the set igmp maxresponse <1-25> vlan configuration command. Use
the no set igmp maxresponse return to default value 10