beautypg.com

4 show ip igmp interface membership – Fortinet 548B User Manual

Page 501

background image

- 501 -

Robustness: This field displays the tuning for the expected packet loss on a subnet. If a subnet is
expected to be have a lot of loss, the Robustness variable may be increased for that interface. This
is a configured value.

Startup Query Interval (secs): This value indicates the interval between General Queries sent by a
Querier on startup. This is a configured value.

Startup Query Count: This value is the number of Queries sent out on startup, separated by the
Startup Query Interval. This is a configured value.

Last Member Query Interval (1/10 of a second): This value indicates the Maximum Response
Time inserted into Group-Specific Queries sent in response to Leave Group messages. This is a
configured

value.

Last Member Query Count: This value is the number of Group-Specific Queries sent before the
router assumes that there are no local members. This is a configured value.

9.2.1.4 show ip igmp interface membership

This command displays the list of interfaces that have registered in the multicast group.

Syntax

show ip igmp interface membership [detail]

< multiipaddr > - A multicast IP address..

[detail] - Display details of subscribed multicast groups.

Default Setting

None

Command Mode

Privileged Exec

User EXEC

Display Message

Iinterface: Valid slot and port number separated by forward slashes.

Interface IP: This displays the IP address of the interface participating in the multicast group.

State: This displays whether the interface has IGMP in Querier mode or Non-Querier mode.

Group Compatibility Mode: The group compatibility mode (v1, v2 or v3) for the specified group on
this interface.

Source Filter Mode: The source filter mode (Include/Exclude) for the specified group on this
interface. This

is “-----” for IGMPv1 and IGMPv2 Membership Reports.

If detail is specified, the following fields are displayed:

Interface: Valid slot and port number separated by forward slashes.

Group Compatibility Mode: The group compatibility mode (v1, v2 or v3) for the specified group on
this interface.