Fortinet 548B - Manual (Page 349)

- 349 -
Default Setting
Disabled
Command Mode
Interface Config
7.18.2.10 ip dhcp snooping trust
This command configures the port as trusted.
Syntax
ip dhcp snooping trust
no ip dhcp snooping trust
no - This command configures the port as untrusted.
Default Setting
Disabled
Command Mode
Interface Config
7.18.2.11 ip dhcp snooping information option
This command ip dhcp snooping information option enables the DHCP L2 option mode on the system.
Syntax
ip dhcp snooping information option
no ip dhcp snooping information option
no - This command disables the DHCP L2 option mode.
Default Setting
Disabled
Command Mode
Global Config