Fortinet 548B - Manual (Page 279)

- 279 -
- IPv4 or IPv6 address or domain name of the SNTP
server.
- The address type is ipv4 or ipv6 or dns or dnsv6.
<1-3> - The range is 1 to 3.
- The range is 1 to 4.
- The range is 1 to 65535.
no - This command deletes an server from the configured SNTP servers.
Default Setting
None
Command Mode
Global Config
7.10.2.8 sntp clock timezone
This command sets the time zone for the switch’s internal clock.
Syntax
sntp clock timezone <0-12> <0-59> {before-utc | after-utc}
- Name of the time zone, usually an acronym. (Range: 1-15 characters)
<0-12> - Number of hours before/after UTC. (Range: 0-12 hours)
<0-59> - Number of minutes before/after UTC. (Range: 0-59 minutes)
before-utc - Sets the local time zone before (east) of UTC.
after-utc - Sets the local time zone after (west) of UTC.
Default Setting
Taipei 08:00 After UTC
Command Mode
Global Config
7.10.2.9 sntp multicast client poll-internal
This command will set the poll interval for SNTP multicast clients in seconds.