3 line vty, 4 exec-timeout, 5 password-threshold – Fortinet 548B User Manual
Page 162
- 162 -
7.3.3.3 line vty
This command is used to enter vty (Telnet) configuration mode.
Syntax
line vty
Default Setting
None
Command Mode
Global Config
7.3.3.4 exec-timeout
This command sets the remote connection session timeout value, in minutes. A session is active as long
as the session has been idle for the value set. A value of 0 indicates that a session remains active
indefinitely. The time is a decimal value from 0 to 160.
i
Changing the timeout value for active sessions does not become effective until the session
is reaccessed. Any keystroke will also activate the new timeout duration.
Syntax
exec-timeout <1-160>
no exec-timeout
no - This command sets the remote connection session timeout value, in minutes, to the default.
Default Setting
5
Command Mode
Line Vty
7.3.3.5 password-threshold
This command is used to set the password instruction threshold limited for the number of failed login
attempts.