4 show lldp remote-device – Fortinet 548B User Manual
Page 286
- 286 -
Display Message
Last Update: Shows the amount of time since the last update to the remote table in days, hours,
minutes, and seconds.
Total Inserts: Total number of inserts to the remote data table.
Total Deletes: Total number of deletes from the remote data table.
Total Drops: Total number of times the complete remote data received was not inserted due to
insufficient resources.
Total Ageouts: Total number of times a complete remote data entry was deleted because the Time
to Live interval expired.
The table contains the following column headings:
Interface: Shows the interface in slot/port format.
Transmit Total: Total number of LLDP packets transmitted on the port.
Receive Total: Total number of LLDP packets received on the port.
Discards: Total number of LLDP frames discarded on the port for any reason.
Errors: The number of invalid LLDP frames received on the port.
Ageouts: Total number of times a complete remote data entry was deleted for the port because the
Time to Live interval expired.
TVL Discards: Shows the number of TLVs discarded
TVL Unknowns: Total number of LLDP TLVs received on the port where the type value is in the
reserved range, and not recognized.
7.12.1.4 show lldp remote-device
This command uses to display summary information about remote devices that transmit current LLDP
data to the system. You can show information about LLDP remote data received on all ports or on a
specific port.
Syntax
show lldp remote-device {
Default Setting
None
Command Mode
Privileged Exec
Display Message
Local Interface: Identifies the interface that received the LLDPDU from the remote device.
Rem ID: Shows the ID of the remote device.