Fortinet 548B - Manual (Page 323)

- 323 -
7.17.1.6 clear pass
This command resets all user passwords to the factory defaults without powering off the switch. You are
prompted to confirm that the password reset should proceed.
Syntax
clear pass
Default Setting
None
Command Mode
Privileged Exec
7.17.1.7 clear counters
This command clears the stats for a specified or for all the ports or for the entire switch based
upon the argument.
Syntax
clear counters [ | all]
- is the desired interface number.
all - All interfaces.
Default Setting
None
Command Mode
Privileged Exec
7.17.1.8 clear dns
This command sets the DNS configuration to default value. The command will only clear the DNS
statistics(used option command counter) or only clear all entries from the DNS cache(used option
command cache).