11 managing cdp function – Fortinet 548B User Manual

Page 679

Text mode
Original mode

- 679 -

11.2.11 Managing CDP Function

11.2.11.1 Defining CDP Configuration Page

Use this menu to configure the parameters for CDP, which is used to discover a CISCO device on the
LAN.

Selection Criteria

Admin Mode - CDP administration mode which are Enable and Disable.

Slot/Port - Specifies the list of ports.

Configurable Data

Hold Time - the legal time period of a received CDP packet.

Transmit Interval - the CDP packet sending interval.

Command Buttons

Submit - Send the updated screen to the switch. Changes take effect on the switch but these
changes will not be retained across a power cycle unless a save is performed.