Fortinet 548B - Manual (Page 483)

- 483 -
Syntax
ip irdp preference < -2147483648-2147483647>
no ip irdp preference
< -2147483648-2147483647> - The range is -2147483648 to 2147483647.
no - This command sets the preference to 0.
Default Setting
The default value is 0.
Command Mode
Global Config
8.7 VLAN Routing Commands
8.7.1 show ip vlan
This command displays the VLAN routing information for all VLANs with routing enabled in the
system.
Syntax
show ip vlan
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
MAC Address used by Routing VLANs: Is the MAC Address associated with the internal
bridgerouter interface (IBRI). The same MAC Address is used by all VLAN routing interfaces. It will
be displayed above the per-VLAN information.
VLAN ID: Is the identifier of the VLAN.
Logical Interface: Indicates the logical slot/port associated with the VLAN routing interface.
IP Address: Displays the IP Address associated with this VLAN.
Subnet Mask: Indicates the subnet mask that is associated with this VLAN.
.