Fortinet 548B - Manual (Page 363)

- 363 -
!
The class name 'default' is reserved and is not allowed here. The class type of match-all
indicates all of the individual match conditions must be true for a packet to be considered
a member of the class.
The optional keywords [{ipv4 | ipv6}] specify the Layer 3 protocol for this class. If not
specified, this parameter defaults to ‘ipv4’. This maintains backward compatibility for
configurations defined on systems before IPv6 match items were supported.
The CLI mode is changed to Class-Map Config or Ipv6-Class-Map Config when this
command is successfully executed depending on the [{ipv4 | ipv6}] keyword specified.
Command Mode
Global Config
7.21.2.2 no class-map
This command eliminates an existing DiffServ class.
Syntax
no class-map
is the name of an existing DiffServ class.
!
The class name 'default' is reserved and is not allowed here. This command may be
issued at any time; if the class is currently referenced by one or more policies or by any
other class, this deletion attempt shall fail.
Command Mode
Global Config
7.21.2.3 class-map rename
This command changes the name of a DiffServ class.
Syntax
class-map rename