Fortinet 548B - Manual (Page 451)

- 451 -
Syntax
area nssa no-summary
no area nssa no-summary
Default Setting
None
Command Mode
Router OSPF Config Mode
8.3.2.11 area nssa translator-role
area nssa translator-role command configures the translator role of the NSSA. A value of always
causes the router to assume the role of the translator the instant it becomes a border router and a value
of candidate causes the router to participate in the translator election process when it attains border
router status. no area nssa translator-role command disables the nssa translator role from the
specified area id.
Syntax
area nssa translator-role {always | candidate}
no area nssa translator-role {always | candidate}
Default Setting
None
Command Mode
Router OSPF Config Mode
8.3.2.12 area nssa translator-stab-intv
area nssa translator-stab-intv command configures the translator of the NSSA. The
is the period of time that an elected translator continues to perform its duties after it
determines that its translator status has been deposed by another router. no area nssa
translator-stab-intv
command disables the nssa translator’s from the specified area
id.
Syntax
area nssa translator-stab-intv
no area nssa translator-stab-intv
Default Setting
None