Fortinet 548B - Manual (Page 882)

- 882 -
Command Buttons
Refresh - Refreshes the page with the latest OSPFv3 neighbor information for the selected interface
and Neighbor Router ID.
11.6.7.8 Viewing OSPFv3 Neighbor Table Information Page
This screen shows the OSPFv3 Neighbor Table, either for all interfaces on which valid OSPFv3
Neighbors are present or the neighbors specific to a given interface on which OSPFv3 Neighbors exist.
This information is displayed only if OSPFv3 is enabled and there exists at least on OSPFv3 enabled
interface having a valid neighbor.
Selection Criteria
Slot/Port - Select the Interface for which the data needs to be displayed. Selecting 'All' will display all
valid interfaces.
Non-Configurable Data
Neighbor Router ID - A 32-bit integer in dotted decimal format representing the Router ID of the
neighbor on the selected Interface.
Priority - The priority of this neighbor in the designated router election algorithm. A value of 0
signifies that the neighbor is not eligible to become the designated router on this particular network.
IntIf ID - The interface ID that the neighbor advertises in its Hello packets on this link.
Interface - A Slot/Port identifying the neighbor interface index.
State - State of the relationship with this neighbor.
Dead Time - Number of seconds since last Hello was received from Adjacent Neighbors. Set to 0 for
neighbors in a state less than or equal to Init.
Command Buttons
Refresh - Refreshes the page with the latest OSPFv3 neighbor information for the selected
interface.