Fortinet 548B - Manual (Page 519)

- 519 -
Command Mode
Interface Config
9.4.2.3 ip multicast ttl-threshold
This command applies the given > to a routing interface. The > is the
TTL threshold which is to be applied to the multicast Data packets which are to be forwarded from the
interface. The value for > has range from 0 to 255.
Syntax
ip multicast ttl-threshold <0 - 255>
no ip multicast ttl-threshold
<0 - 255> - the TTL threshold.
no - This command applies the default > to a routing interface. The > is the
TTL threshold which is to be applied to the multicast Data packets which are to be forwarded from
the interface.
Default Setting
1
Command Mode
Interface Config
9.5 Protocol Independent Multicast – Dense Mode (PIM-DM) Commands
9.5.1 Show Commands
9.5.1.1 show ip pimdm
This command displays the system-wide information for PIM-DM.
Syntax
show ip pimdm
Default Setting
None