Fortinet 548B - Manual (Page 497)

- 497 -
Upstream Neighbor: This field indicates the IP Address of the neighbor which is the source for the
packets for a specified multicast address.
Interface: This field displays the interface used to receive the packets sent by the sources.
Metric: This field displays the distance in hops to the source subnet. This field has a different
meaning than the Interface Metric field.
Expiry Time(secs): This field indicates the expiry time in seconds. This is the time remaining for this
route to age out.
Up Time(secs): This field indicates the time when a specified route was learnt, in seconds.
9.1.2 Configuration Commands
9.1.2.1 ip dvmrp
This command sets administrative mode of DVMRP in the router to active. IGMP must be enabled
before DVMRP can be enabled.
Syntax
ip dvmrp
no ip dvmrp
no - This command sets administrative mode of DVMRP in the router to inactive. IGMP must be
enabled before DVMRP can be enabled.
Default Setting
Disabled
Command Mode
Global Config
This command sets the administrative mode of DVMRP on an interface to active.
Syntax
ip dvmrp
no ip dvmrp
no - This command sets administrative mode of DVMRP on an interface to inactive.
Default Setting
Disabled