Fortinet 548B - Manual (Page 92)

- 92 -
Syntax
set igmp maxresponse <1-25>
no set igmp maxresponse
< vlanid > - VLAN ID (Range: 1 – 3965).
<1-25> -- This value must be less than the IGMP Query Interval time value. The range is 1 to 25
seconds.
Default Setting
10
Command Mode
VLAN Mode
7.2.6.12 set igmp mcrtrexpiretime
The user can go to the CLI Interface VLAN Configuration Mode to set the Multicast Router Present
Expiration time on a particular VLAN, use the set igmp mcrtrexpiretime <0-3600> vlan
configuration command. Use the no set igmp mcrtrexpiretime to return to default value 0.
Syntax
set igmp mcrtrexpiretime <0-3600>
no set igmp mcrtrexpiretime
< vlanid > - VLAN ID (Range: 1 – 3965).
<0-3600> - The range of the Multicat Router Present Expire time is 0 to 3600 seconds
Default Setting
0
Command Mode
VLAN Mode
7.2.6.13 ip igmp snooping static
The user can go to the Global Mode and add a port to multicast group, use the ip igmp snooping static
Global command. The MAC address of the L2Mcast Group in the format 01:00:5e:xx:xx:xx.