Fortinet 548B - Manual (Page 777)

- 777 -
Media Application Type - Specifies the application type. Types of application types are
unknown, voicesignaling, guestvoice, guestvoicesignalling, softphonevoice, videoconferencing,
streammingvideo, vidoesignalling. Each application type that is received has the VLAN id,
priority, DSCP, tagged bit status and unknown bit status. A port may receive one or many such
application types. If a network policy TLV has been receive on this port only then would this
information be displayed.
VLAN Id - Specifies the VLAN id associated with a particular policy type.
Priority - Specifies the priority associated with a particular policy type.
DSCP - Specifies the DSCP associated with a particular policy type.
Unknown Bit Status - Specifies the unknown bit associated with a particular policy type.
Tagged Bit Status - Specifies the tagged bit associated with a particular policy type.
Inventory Information - Specifies if location TLV is received in LLDP frames on this port.
Hardware Revision - Specifies hardware version of the remote device.
Firmware Revision - Specifies Firmware version of the remote device.
Software Revision - Specifies Software version of the remote device.
Serial Number - Specifies serial number of the remote device.
Manufacturer Name - Specifies manufacturers name of the remote device.
Model Name - Specifies model name of the remote device.
Asset ID - Specifies asset id of the remote device.
Location Information - Specifies if location TLV is received in LLDP frames on this port.
Sub Type - Specifies type of location information.
Location Information - Specifies the location information as a string for given type of location id.
Extended PoE - Specifies if remote device is a PoE device.
Device Type - Specifies remote device's PoE device type connected to this port.
Extended PoE PSE - Specifies if extended PSE TLV is received in LLDP frame on this port.
Available - Specifies the remote ports PSE power value in tenths of watts.
Source
-
Specifies the remote ports PSE power source.
Priority - Specifies the remote ports PSE power priority.
Extended PoE PD - Specifies if extended PD TLV is received in LLDP frame on this port.
Required - Specifies the remote port's PD power requirement.
Source
-
Specifies the remote port's PD power source.
Priority
-
Specifies the remote port's PD power priority.
Command Buttons
Refresh - Updates the information on the page.